Preventing Memory Rings
Use A Lid For A Clean Burn
Wick Maintenance
Wick Trimming Guidelines
Candle Won't Stay Lit?
Is Your Candle Tunneling?
How to Keep the Candle Magic Going
Candle Safety
Proper Candle Storage

Preventing Memory Rings

The first burn of a candle is the most important. To begin, candles should burn one hour for every 1 inch in diameter of the actual candle size. Therefore, a larger jar candle should burn a minimum of 4 hours to liquefy the entire top layer of wax. If the wax is not allowed to liquefy or to melt from edge to edge of the jar or tumbler, it will create a “memory ring,” especially if this is the first time the candle is lit. Once a candle has this “memory ring,” it will continue to tunnel and to burn that way for the life of the candle.

Try not to have frequent short burns. This will encourage the candle to tunnel. It is better to light the candle for longer and less often than for shorter lengths more frequently.


Use A Lid For A Clean Burn

A great candle tool to prevent tunneling and to promote a clean, even burn that uses every inch of wax is a lid. When a lid sits on top of the large or medium jar and helps to steady the flame so that an even wax pool is formed. The use of a lid ensures a clean, even burn that will provide a full wax pool. The result is a jar that burns clean, even, and when used with a well-maintained wick, can prevent excess sooting. All while allowing superb distribution of the fragrance.


Wick Maintenance

Keep the wick trimmed to 1/8 inch at all times. We suggest trimming the wick every 4 hours of burn time. When wick trimming, you should always extinguish the flame, let the candle come to room temperature, and trim the wick to 1/8 of inch before relighting. For the best results, you should always use a wick trimmer.


Wick Trimming Guidelines:

1. Place the bottom of the trimmer flush with the surface of the candle.
2. Rock the trimmer back so that the “elbow” now rests on the surface of the candle.
3. Ensure that your trimmer is at a 45-degree angle to get the proper wick length. This will prevent
the wick from being cut too short, causing the candle to burn improperly.
4. Bring the two handles together to trim the wick. Discard the remnant wick before lighting.
5. Candles should not be burned for more than four hours at a time.
6. It is recommended that after burning for four hours, candles be extinguished, allowed to cool
for two hours, and trimmed before relighting.


Candle Won't Stay Lit?

Dependent upon the size of your jar, your candle may not be getting enough oxygen to stay lit. We suggest that you follow the half inch rule. Discontinue use of a candle when ½” of wax remains at the bottom of the jar. This will prevent possible heat damage to the counter/surface or container itself. The glass can get hot on the bottom as the flame nears the base of the jar and most of the wax has been consumed. By following this instruction, the glass will not get too hot.


Is Your Candle Tunneling?

Make your candle a tin foil hat and cut a hole in the top for the flame. This will allow heat to radiate down and melt the edge wax. However, this can be dangerous. Make sure to do this in an empty sink and do not leave the candle unattended. When removing the foil hat, remember it will be hot and may burn you! If you’re having trouble getting the edges to melt down, you can always cut the edge areas off and melt them over a tea light wax burner to get the most out of the fragrance!


How to Keep the Candle Magic Going

1. TRIM THE WICK. Keep your wick trimmed to 1/8 at all times.
2. LET THE WAX POOL. Each time you burn your candle, allow the entire top layer to become
a fragrant pool of liquid wax and you'll get the biggest, boldest scent possible.
3. BURN IT SAFELY. Always burn your candle on a heat resistant surface, keep it out of drafts
and NEVER leave it unattended while lit. Try not to have frequent short burns. This will
encourage the candle to tunnel. It is better to light the candle for longer and less often than for
shorter lengths more frequently.
4. KNOW WHEN TO SAY GOODBYE. When only 1/2 of wax remains, it's time to let your
candle go.
5. REPEAT STEPS 1 THROUGH 5. Keep going until you've tried them all!
6. Use a wick trimmer for a perfect trim.


Candle Safety

Always burn candles well away from drafts, other heat sources, and anything flammable. Make sure burning candles are out of reach of children and pets. Never leave a burning candle unattended. Do not exceed 4 hours of burning time.


Proper Candle Storage

The candle wax and fragrance oils we use in our candles are sensitive to both temperature and light, so please be careful when storing candles for an extended period of time. If you store your candle, be sure it is in a cool, dry place away from direct sunlight or intense light. Keeping it in a dark place like a cupboard or box will protect it from fading and discoloration.

Since our candles can be sensitive to extreme cold and heat, it’s best to store them between 50ºF and 85ºF. And be sure not to leave our candles in your car for an extended period of time (particularly on hot days) as they may melt or discolor. Extreme cold causes cracking and separation, so it’s best to follow our temperature guidelines. After long exposure to the cold, you should allow the candle to return to room temperature for a minimum of 2 hours before burning it to minimize potential damage.